05 Business Health
← Technical Guide

Chapter 05

Business Health

The cockpit that gathers the company’s functional areas into a single health score from 0 to 100; for each area it shows together the components that make it up, which of them were measured, and what the score is built on.

Overview

Business Health gives each of the company’s functional areas a score between 0–100 and combines these scores into a single overall score according to their weights. Area scores are calculated from the records of the relevant modules. If an area has no data, its score is not written as zero: that area is counted as “not measurable” and is removed from the overall score.

FieldWhat it looks at
PeopleHeadcount, turnover, hiring speed
FinanceCash, profitability, expense balance
Receivables & collectionOverdue receivables, average collection period
StockTurnover rate, dead stock, coverage
CustomerGoing silent, contraction, concentration risk
SalesRevenue trend, target attainment
Alignment (inside the People card)Targets cascading down to the team
Leadership (inside the People card)Manager load, headcount per team
OperationPurchasing, logistics, installed base, problem resolution, spare parts, service
ProductionProduction, work orders, capacity
BandScore at leastScore below
Critical—40
Risky4055
Watch5570
Healthy70—
Waiting for data—Score could not be calculated

Next to the score, the coverage ratio is always written: the ratio of the weight of the measurable areas to the total weight. A score with low coverage means it rests on a small number of areas, or on a small number of the areas’ components. An area of which only some components can be measured enters this ratio to that extent. How the score is calculated is explained in full on PULS’s publicly open “How we measure” page (/nasil-olcuyoruz).

Business Health Cockpit

At the top of the screen, the overall score is shown inside a ring; the ring’s segments are the areas’ shares in the score. Next to it are the band name, the coverage ratio, how many areas are connected, and a single sentence summarizing the score. If the areas are measured in different time windows, a “mixed window” note appears: in this case, instead of comparing the overall score of two days, one should look at the area cards. If an area’s measurement for that day is defective (for example, it could not be read), the score is still written but “Not comparable” appears instead of the band and the sentence explains the reason; if no area can be measured, “Not measurable” is written.

  • Trend strip: the line of the overall score by day. The series is built from the days on which the cockpit was opened; days when it was not opened remain as gaps and are not filled in. Days on which an area could not be read are marked and do not take part in the comparison; if the calculation method has changed, this is also indicated on the line.
  • Attention today: areas whose band is critical or at risk or that are worsening, with their previous and latest score and the date range. This list comes only from measured areas.
  • Areas: a card for every area that enters the score in your organization (details below).
  • By sector: if your organization’s sector is selected, for some measures the sector’s lower and upper quartile range, the median and your value; the source is written on each row. If no sector is selected, a card appears inviting you to select a sector.

At the top of the area card are the area’s name, its share in the overall score (as a percentage; the same number as the segment on the ring), its score and its direction. If a comparison with the previous day cannot be made because the area’s calculation method has changed, “method changed” and the date of the change are written instead of the direction. Below it come the band name, the time window in which the area was measured, and the area’s own trend chart. The card opens to the module it is linked to; a card with no score also opens, it just appears faded.

The “Parts” block shows the components that make up the area. For the areas in the table below, this list comes from PULS’s component catalog: every organization gets the same components, in the same order, and without trimming; a component that cannot be measured is not removed from the list but stays as a grey row. If the area’s calculation also produces a part that is not in the catalog, that part is added to the end of the list. In the card’s narrow column the short name of the component is written; when you hover over it, the full name appears. If none of the measured parts has a score trend, a “trend is accumulating” note appears in the block heading.

FieldNumber of componentsShort name on the cardFull name
Finance7Profitability · Cash · Working capital · Debt & Financing · Expense & Efficiency · Forecast discipline · FX & publicProfitability · Liquidity & cash · Working capital (cash conversion cycle) · Indebtedness & financing · Cost structure · Planning & forecasting · Exchange rate, inflation & public obligations
Receivables & collection5Overdue · Collection speed · Loss risk · Concentration · Limit disciplineOverdue & aging · Collection speed (delay, DSO) · Loss risk (legal proceedings) · Receivables concentration (top 10 accounts) · Credit & limit discipline
Sales5Growth · Margin discipline · Brand diversity · Retention · Target alignmentGrowth (Q2/Q1) · Profitability quality (margin erosion) · Product & brand dependence · Retention (recurring revenue) · Predictability & target
Customer5Concentration · Active base · Loss warning · Coverage & contact · Relationship healthCustomer concentration · Active base (last 2 months) · Early loss warning (going quiet, contraction) · Coverage & contact · Relationship health
Stock6Turnover · Availability · Idle stock · Classification · Warehouse distribution · PlanningTurnover (stock coverage days) · Availability (sales without stock) · Excess & dead stock · Record accuracy (classification) · Portfolio & location (warehouse distribution) · Stock planning (safety stock)
Production6Delivery date adherence · OEE · Quality & scrap · Maintenance · Cost · CapacityPlan & delivery date adherence · Equipment effectiveness (OEE) · Quality & scrap · Maintenance (MTBF/MTTR) · Production cost · Capacity utilization
People6Performance · Engagement · Development · Leadership · Talent flow · OHS & regulationPerformance & target · Engagement · Development · Leadership (visibility, succession cover) · Talent flow (turnover, recruiting) · OHS & regulation
How the component appears on the cardMeaning
Bar and 0–100 score (measured)The component was measured. The color of the bar is the component’s band; if there is a score trend, a thin line is drawn beneath it. When you hover over it, its full name, score and band are shown.
Grey, “no data”The component’s calculation is linked to the card but produced no score in this measurement. For the areas in the table, hovering over it shows what data the component requires (“required: …”).
Grey, “not set up”PULS does not measure this component yet; the row is there to show that the area also covers this component. Hovering over it shows what data the component requires (“required: …”).

On the Production card, the Equipment effectiveness (OEE), Quality & scrap, and Maintenance (MTBF/MTTR) components come from PULS’s measure calculations and appear on the card with their own scores. A component’s score is the plain average of its measures that produce a score; if it has no measure that produces a score, the component is not written as 0 but stays as a grey “no data” row. The Production area score is built, by the rule above, from all of its measured components; Plan & delivery date adherence is one of them. The area’s own calculation rests on the Plan & delivery date adherence component: if that component did not produce a score, the Production area stays without a score even if the other components were measured. If one of the measure calculations of these components returns an error, the Production area cannot be built in that measurement: the card appears without a score, the component rows stay grey, and the overall score counts that measurement as defective (the “Not comparable” situation described above).

On the Receivables & Collection card, the Loss risk (legal proceedings) and Receivables concentration (top 10 accounts) components also come from PULS’s measure calculations and are scored by the same rule as the Production components above; they enter the area score with the same weight as the other components. The Loss risk component looks at the share of receivables marked for legal proceedings in the total of receivables with a positive balance in the latest aging snapshot; aging over 365 days does not enter this calculation. If no row in the snapshot carries a legal proceedings mark, the component is not written as 0 but stays as a grey “no data” row. The score of the Concentration component comes from the concentration index (HHI) calculated from the distribution among accounts whose net balance is positive; the share of the top 10 accounts in receivables is only displayed and does not enter the score. If the calculation of these two components returns an error, then in that measurement only the Receivables & Collection card appears without a score and all of its component rows stay grey; the Finance card is not affected, the overall score is calculated without this area, and the coverage ratio falls.

The Collection speed (delay, DSO) component is calculated per invoice: the average delay in days of the overdue invoices in the open invoice list, weighted by their amounts. The shorter the delay, the higher the score. For an organization whose receivables arrive not per invoice with due dates but only as account balances, this component stays grey and counts as not measurable; no account-level average is put in its place.

The Operations area has no component catalog: the parts on its card are the modules that make up the area (explained in Chapter 15). Measured modules come first; a module that cannot be measured is written as “no data”. On the People card, the Alignment and Leadership scores appear separately under the heading; they do not appear as separate cards but are included in the People score.

The Talent flow (turnover, recruiting) component on the People card also comes from PULS’s measure calculation: over the last 12 completed months, the ratio of voluntary leavers to the average headcount among employees with at least 12 months of tenure. A voluntary departure is a departure whose reason was entered as “Voluntary resignation” or “At own request”; a passive employee without a departure record does not enter the calculation. The lower the ratio, the higher the score. The calculation is done in the database, and only totals reach the application, not personal information. If there is no headcount with at least 12 months of tenure, the component stays grey.

The “Measures” block appears if you have permission to see the card’s module, and shows the area’s raw values (such as days, ratios, amounts) with their direction and short trend. At most 2 measures are written on a card; the rest are counted in the “+N measures — in the module” row, and their names appear when you hover over it. A measure that has the same name as a part is not written a second time. If the measure history could not be read, “trend could not be read” is written in the block heading; the values are still shown.

The screen is read-only; the score is not changed here. The “How we measure” link opens the explanation of the calculation, and the “What is your score built on?” link opens the Health Setup screen.

Health Setup

This screen builds, from your business’s own answers, how much weight each area will carry in the overall score. Anyone who can see the Business Health screen can open it; the health.manage permission is required to change it. A user without the permission sees the screen read-only and the required permission is stated. The top of the screen states one of three situations: the setup comes from your answers, no answers have been given yet (PULS’s default weights apply), or you can only view.

The “What does your business do?” questionArea removed from the score if you answer “No”Area added to the score if you answer “Yes”
Do you keep goods / stock in a warehouse?Stock—
Do you sell to your customers on credit terms (open account)?Receivables & collection—
Do you do your own production / manufacturing?ProductionProduction
  • A “No” answer does not count the area as 0 points; it removes the area from the calculation.
  • On the “What are you focusing on this period?” card, up to 3 areas can be selected; the selected areas carry more weight in the score. Areas you have said you do not do, and areas whose measurement is not connected, cannot be selected.
  • Sector is read-only on this screen; it is changed in the organization settings (described in Chapter 17). Areas that stand out for your sector gain weight.
  • The side panel’s “What your score will be built on” shows each area’s share and its difference from the default; it is a preview before saving. When you save with “Save and update health score”, the score is calculated with the new weights; if there are unsaved changes, the screen says so.